# About Sundog Aurora Heat Pumps

> How Sundog plans heat pump work in Aurora, CO: measured first, sized to the house, every item in a written estimate, with readings left at start-up.

URL: https://sundogauroraheatpumps.com/about/

We plan heat pump systems for Aurora houses from what we measure, not from the label on the old equipment.

## How we approach a heat pump job

Most heat pump problems start before the equipment is ordered: a system sized from the old furnace's nameplate, a return that was never big enough, a panel with no room for the backup. We built Sundog around catching those on the first visit.

Every estimate starts with a room-by-room load calculation, duct and airflow checks and a look at the electrical panel. We walk the outdoor spot for snow, roof drip and line-set length. Only then do we recommend equipment, and we choose it from its published output at 5°F, not from its nominal size. See [how sizing works](https://sundogauroraheatpumps.com/guide/heat-pump-sizing/) and [why ducts matter](https://sundogauroraheatpumps.com/guide/ductwork-for-heat-pumps/).

## What you get in writing

- Model numbers and the low-temperature capacity of the equipment we recommend
- Duct and electrical work, each on its own line with its reason
- The permit, removal of the old equipment, and the pad or stand
- The start-up checks we run, and the readings we leave with you
- Which rebates your address and equipment may qualify for, checked before the estimate is final

## What we do

We work on ducted and ductless heat pumps for homes and light commercial buildings across Aurora and the towns around it.

### Installation and replacement

[Ducted heat pumps](https://sundogauroraheatpumps.com/heat-pump-installation/), [replacements](https://sundogauroraheatpumps.com/heat-pump-replacement/) and [cold-climate systems](https://sundogauroraheatpumps.com/cold-climate-heat-pump-installation/) sized from the house.

### Keeping or leaving gas

[Dual fuel](https://sundogauroraheatpumps.com/dual-fuel-heat-pump/) with the furnace you keep, or a [full conversion](https://sundogauroraheatpumps.com/heat-pump-conversion/) with planned electric backup.

### Rooms the ducts miss

[Ductless mini-splits](https://sundogauroraheatpumps.com/ductless-mini-split-installation/) for additions, basements and homes without ducts.

### After the install

[Repair](https://sundogauroraheatpumps.com/heat-pump-repair/) that finds the cause first, and [maintenance](https://sundogauroraheatpumps.com/heat-pump-maintenance/) that records readings you can compare year to year.

## How we price

We publish our typical ranges so you know where a job usually lands before anyone visits: $13,000 to $25,000 for a cold-climate ducted system, $19,000 to $28,000 for dual fuel with a new furnace, and $4,500 to $9,500 for one ductless zone. Your price comes from the site visit and the written estimate. The [cost page](https://sundogauroraheatpumps.com/heat-pump-installation-cost/) explains what moves a price up or down.

## Where we work

We serve Aurora and the towns within about 20 miles, from Denver and Commerce City to Parker, Castle Pines and Highlands Ranch. The [service area list](https://sundogauroraheatpumps.com/service-areas/) shows each one with its housing age and heating fuel, which is usually where a heat pump decision starts.

## Talk to us about your house

Tell us about the house and the rooms that bother you, and we will start with a first range and book the visit. [Get an estimate](https://sundogauroraheatpumps.com/contact/) or call [(719) 417-2475](tel:+17194172475).
