# What do you need to claim a heat pump incentive in Colorado?

> Claiming a heat pump incentive in Colorado: utility territory, qualifying equipment, installer, invoice details, application timing and records to keep.

URL: https://sundogauroraheatpumps.com/guide/heat-pump-installation-incentive-checklist/

Six things decide whether a rebate pays out: the address, the equipment, the installer, the invoice, the timing and the records.

## The short answer

You need an address in the program's territory, equipment that qualifies by model number, an installer the program accepts, an itemized invoice, an application inside the program window and copies of everything. Most rejected claims fail on one of these after the work is done, so check them before you sign. The programs themselves are in our [rebates guide](https://sundogauroraheatpumps.com/guide/heat-pump-rebates-aurora/).

## Questions to ask before you sign

Five questions settle most of the checklist in one conversation. Ask them of any installer, us included, and expect answers in writing.

- Which incentives do you expect this address to qualify for, and which lower the invoice?
- Are the proposed indoor and outdoor units a qualifying matched pair, by model number?
- Are you a participating or registered contractor for each program you named?
- What are the current installation and application deadlines?
- Who submits each application, and what do you leave with me after start-up?

## 1. Check your utility territory

Utility rebates follow the meter, not the city line. Xcel Energy serves most Aurora homes for electric and gas, but not every address.

### Electric and gas on Xcel

Both utility programs can apply, and the Aurora F-3 project needs active Xcel gas service inside its mapped area.

### Electric only, or another utility

Look at your bill's header and account type. A different utility means a different program, with its own rules.

## 2. Confirm the equipment qualifies

Programs qualify equipment by model number, and for split systems by the indoor and outdoor units as a matched pair. Low-temperature output matters most here, for the reasons in our [cold-weather performance guide](https://sundogauroraheatpumps.com/guide/cold-weather-heat-pump-performance/), so it is also the figure most programs check.

### What to look for

The exact outdoor and indoor model numbers, the AHRI certificate for the matched pair, and the rated heating capacity at low temperature. Cold-climate programs look at output at 5°F; ENERGY STAR's cold-climate mark requires a COP of at least 1.75 at that temperature.

### Where it goes wrong

A substitute coil or air handler on install day can break the match. We put model numbers on the written estimate and install what it lists, so the match on paper is the match in the basement.

## 3. Use an installer the program accepts

Each program names who may install the work.

### Xcel's rebate

Built around participating contractors in Xcel's Trade Partner Network; Xcel's page also shows a do-it-yourself route for some mini-splits.

### Aurora F-3

Requires a participating contractor and an address check against the map.

### State tax credit

Claimed by a contractor registered with the Colorado Energy Office, who passes the discount to you.

### State Home Energy Rebates

Registered contractor, with approval before the work starts.

## 4. Make sure the invoice carries what the program asks

A vague invoice is the most common reason a claim stalls. Ours itemizes the job by default, which covers most of what programs ask for.

| Invoice item | Why the program wants it |
| --- | --- |
| Service address and customer name | Matches the claim to the utility account |
| Outdoor and indoor model numbers | Proves the qualifying matched pair |
| Installation date | Sets which program terms apply |
| Installed price, itemized | Rebates cannot exceed the installation cost |
| State of Colorado Heat Pump Discount line | Shows the tax-credit discount was passed through, where it applies |
| Installer name and contact | Confirms a participating or registered contractor |

## 5. Watch the application window

Programs set two clocks: one for when the work is installed and invoiced, and a later one for when the application must arrive. Program years change terms, so check the current program dates before you book.

### Before the job

Some programs need approval first. Colorado's Home Energy Rebates are not paid retroactively, so apply before work starts.

### After the job

Utility rebates are usually filed after installation and start-up. File soon after; waiting risks a closed window or a changed schedule.

## 6. Keep the records

Keep one folder, paper or digital, for the life of the system. It also helps with any later [repair](https://sundogauroraheatpumps.com/heat-pump-repair/) and with [maintenance](https://sundogauroraheatpumps.com/heat-pump-maintenance/).

- The written estimate and the final itemized invoice
- Model and serial numbers for each unit
- The AHRI certificate for the matched pair
- The permit and the city's final inspection
- Start-up readings for airflow, charge and controls
- Application confirmation numbers and any approval letters

## Why claims get turned down

Most failed claims trace back to a detail that was fixable before the job, not after it.

### Problems with the equipment

The installed coil or air handler is not the one on the qualifying match, the outdoor unit was swapped for a similar model that is not listed, or the capacity on the application does not match the certificate. Each of these shows up only when the program compares model numbers.

### Problems with timing and paperwork

The job was invoiced after the installation deadline, the application arrived after the window closed, the invoice lacked model numbers or an itemized price, or the installer was not in the program. A program that needs approval first will not pay for work that started without it.

## Get the checklist done before you sign

Sundog installs heat pumps across Aurora and [nearby towns](https://sundogauroraheatpumps.com/service-areas/). Call [(719) 417-2475](tel:+17194172475) or [request an estimate](https://sundogauroraheatpumps.com/contact/). We check rebate eligibility for your address before the estimate is final and leave the start-up readings, model numbers and rebate paperwork with you. Program terms mostly favor [cold-climate equipment](https://sundogauroraheatpumps.com/cold-climate-heat-pump-installation/), so that is where we start, and the [cost page](https://sundogauroraheatpumps.com/heat-pump-installation-cost/) shows the prices incentives come off.

## Questions people ask

### Do I file the Xcel rebate myself?

It depends on the path. Through a participating contractor the contractor usually submits it; the program's do-it-yourself path for some mini-splits is filed by you. We tell you which applies on the estimate.

### What is an AHRI certificate?

A certificate from the Air-Conditioning, Heating, and Refrigeration Institute's directory that rates a specific indoor and outdoor unit as a matched pair. Programs use it to confirm the equipment qualifies.

### Can I claim a rebate for a system installed last year?

Only under that program year's terms and inside its application window. If the window has closed, the claim is usually lost, which is why we leave the paperwork with you right after start-up, so it can go in while the window is open.

## Related service

Ducted heat pump installation

Before we recommend a heat pump, we measure the house: room by room for the load, at the blower for airflow, at the panel for capacity.

## More guides

Heat pump rebates in Aurora

Eligibility comes first: your address, your utility service, the equipment and who installs it decide what applies.

Installation process

From the first visit to the city's inspection, here is the order of the work, what each step proves and what you should have in hand at the end.

Heat pump operating cost in Colorado

Three inputs decide it: what you pay per kWh and per therm, how efficient the heat pump is at each outdoor temperature, and where backup heat takes over.

Aurora heat pump planning guide

The whole decision in the order it gets made: how a ducted heat pump works, what it does in the cold, how it is sized, what happens to your furnace, ducts and panel, and what it costs to buy and run.

Heat pump sizing

Size comes from what your house loses on a cold night and gains on a hot afternoon, matched to equipment by its output in the cold.
